Analysis of microwave integrated circuits using the finite element method

Anastasis C. Polycarpou; Constantine Balanis

Analysis of microwave integrated circuits using the finite element method

Anastasis C. Polycarpou
, Constantine Balanis

Electrical Engineering

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Abstract

Three-dimensional unshielded microwave circuits were modeled using full-wave vector finite element method. A two-dimensional eigenvalue analysis is applied at the input and output ports to evaluate the dominant field distribution, reference voltage, propagation constant, and characteristic impedance of the transmission lines. The field distribution at the input port is used to excite the three-dimensional circuit. The propagation constant is used in the implementation of the first-order absorbing boundary conditions at the two ports, whereas the reference voltage and characteristic impedance are both used in the evaluation of the corresponding S-parameters.

Original language	English (US)
Title of host publication	IEEE Antennas and Propagation Society, AP-S International Symposium (Digest)
Publisher	IEEE
Pages	668-671
Number of pages	4
Volume	2
State	Published - 1997
Event	Proceedings of the 1997 IEEE Antennas and Propagation Society International Symposium. Part 1 (of 4) - Montreal, Can Duration: Jul 13 1997 → Jul 18 1997

Other

Other	Proceedings of the 1997 IEEE Antennas and Propagation Society International Symposium. Part 1 (of 4)
City	Montreal, Can
Period	7/13/97 → 7/18/97

ASJC Scopus subject areas

Electrical and Electronic Engineering

Cite this

@inproceedings{04f9c657b4c148aebc564858a45c7ce4,

title = "Analysis of microwave integrated circuits using the finite element method",

abstract = "Three-dimensional unshielded microwave circuits were modeled using full-wave vector finite element method. A two-dimensional eigenvalue analysis is applied at the input and output ports to evaluate the dominant field distribution, reference voltage, propagation constant, and characteristic impedance of the transmission lines. The field distribution at the input port is used to excite the three-dimensional circuit. The propagation constant is used in the implementation of the first-order absorbing boundary conditions at the two ports, whereas the reference voltage and characteristic impedance are both used in the evaluation of the corresponding S-parameters.",

author = "Polycarpou, \{Anastasis C.\} and Constantine Balanis",

year = "1997",

language = "English (US)",

volume = "2",

pages = "668--671",

booktitle = "IEEE Antennas and Propagation Society, AP-S International Symposium (Digest)",

publisher = "IEEE",

note = "Proceedings of the 1997 IEEE Antennas and Propagation Society International Symposium. Part 1 (of 4) ; Conference date: 13-07-1997 Through 18-07-1997",

}

TY - GEN

T1 - Analysis of microwave integrated circuits using the finite element method

AU - Polycarpou, Anastasis C.

AU - Balanis, Constantine

PY - 1997

Y1 - 1997

N2 - Three-dimensional unshielded microwave circuits were modeled using full-wave vector finite element method. A two-dimensional eigenvalue analysis is applied at the input and output ports to evaluate the dominant field distribution, reference voltage, propagation constant, and characteristic impedance of the transmission lines. The field distribution at the input port is used to excite the three-dimensional circuit. The propagation constant is used in the implementation of the first-order absorbing boundary conditions at the two ports, whereas the reference voltage and characteristic impedance are both used in the evaluation of the corresponding S-parameters.

AB - Three-dimensional unshielded microwave circuits were modeled using full-wave vector finite element method. A two-dimensional eigenvalue analysis is applied at the input and output ports to evaluate the dominant field distribution, reference voltage, propagation constant, and characteristic impedance of the transmission lines. The field distribution at the input port is used to excite the three-dimensional circuit. The propagation constant is used in the implementation of the first-order absorbing boundary conditions at the two ports, whereas the reference voltage and characteristic impedance are both used in the evaluation of the corresponding S-parameters.

UR - https://www.scopus.com/pages/publications/0030711371

UR - https://www.scopus.com/pages/publications/0030711371#tab=citedBy

M3 - Conference contribution

VL - 2

SP - 668

EP - 671

BT - IEEE Antennas and Propagation Society, AP-S International Symposium (Digest)

PB - IEEE

T2 - Proceedings of the 1997 IEEE Antennas and Propagation Society International Symposium. Part 1 (of 4)

Y2 - 13 July 1997 through 18 July 1997

ER -

Analysis of microwave integrated circuits using the finite element method

Abstract

Other

ASJC Scopus subject areas

Other files and links

Fingerprint

Cite this