Beam quality of photonic-crystal fibers

Arash Mafi; Jerome V. Moloney

doi:10.1109/JLT.2005.850028

Beam quality of photonic-crystal fibers

Arash Mafi
, Jerome V. Moloney

Research output: Contribution to journal › Article › peer-review

40 Scopus citations

Abstract

In this paper, we investigate the beam quality of photonic-crystal fibers (PCFs) with one, three, and seven missing airholes. The beam quality factor M² of a PCF is generally larger than unity, even if it is single mode. The results are especially important for the design and measurements of single-mode PCF lasers. A comparison between an M² measurement of the laser beam and the reported numbers can establish whether a PCF laser is operating as single mode or is contaminated by higher order modes.

Original language	English (US)
Pages (from-to)	2267-2270
Number of pages	4
Journal	Journal of Lightwave Technology
Volume	23
Issue number	7
DOIs	https://doi.org/10.1109/JLT.2005.850028
State	Published - Jul 2005

Keywords

Beam quality factor
Photonic crystals

ASJC Scopus subject areas

Atomic and Molecular Physics, and Optics

Access to Document

10.1109/JLT.2005.850028

Cite this

@article{9167d319eac4401389bcbc8a1e7b1d22,

title = "Beam quality of photonic-crystal fibers",

abstract = "In this paper, we investigate the beam quality of photonic-crystal fibers (PCFs) with one, three, and seven missing airholes. The beam quality factor M2 of a PCF is generally larger than unity, even if it is single mode. The results are especially important for the design and measurements of single-mode PCF lasers. A comparison between an M2 measurement of the laser beam and the reported numbers can establish whether a PCF laser is operating as single mode or is contaminated by higher order modes.",

keywords = "Beam quality factor, Photonic crystals",

author = "Arash Mafi and Moloney, \{Jerome V.\}",

note = "Funding Information: Manuscript received January 5, 2005; revised March 2, 2005. This work was supported by the Air Force Office for Scientific Research, Air Force Material Command, USAF, under grant number AFOSR F49620-02-1-0380. The authors are with the Optical Sciences Center and the Arizona Center for Mathematical Sciences, University of Arizona, Tucson, AZ 85721 USA (e-mail: [email protected]). Digital Object Identifier 10.1109/JLT.2005.850028",

year = "2005",

month = jul,

doi = "10.1109/JLT.2005.850028",

language = "English (US)",

volume = "23",

pages = "2267--2270",

journal = "Journal of Lightwave Technology",

issn = "0733-8724",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

number = "7",

}

TY - JOUR

T1 - Beam quality of photonic-crystal fibers

AU - Mafi, Arash

AU - Moloney, Jerome V.

N1 - Funding Information: Manuscript received January 5, 2005; revised March 2, 2005. This work was supported by the Air Force Office for Scientific Research, Air Force Material Command, USAF, under grant number AFOSR F49620-02-1-0380. The authors are with the Optical Sciences Center and the Arizona Center for Mathematical Sciences, University of Arizona, Tucson, AZ 85721 USA (e-mail: [email protected]). Digital Object Identifier 10.1109/JLT.2005.850028

PY - 2005/7

Y1 - 2005/7

N2 - In this paper, we investigate the beam quality of photonic-crystal fibers (PCFs) with one, three, and seven missing airholes. The beam quality factor M2 of a PCF is generally larger than unity, even if it is single mode. The results are especially important for the design and measurements of single-mode PCF lasers. A comparison between an M2 measurement of the laser beam and the reported numbers can establish whether a PCF laser is operating as single mode or is contaminated by higher order modes.

AB - In this paper, we investigate the beam quality of photonic-crystal fibers (PCFs) with one, three, and seven missing airholes. The beam quality factor M2 of a PCF is generally larger than unity, even if it is single mode. The results are especially important for the design and measurements of single-mode PCF lasers. A comparison between an M2 measurement of the laser beam and the reported numbers can establish whether a PCF laser is operating as single mode or is contaminated by higher order modes.

KW - Beam quality factor

KW - Photonic crystals

UR - https://www.scopus.com/pages/publications/23144441644

UR - https://www.scopus.com/pages/publications/23144441644#tab=citedBy

U2 - 10.1109/JLT.2005.850028

DO - 10.1109/JLT.2005.850028

M3 - Article

SN - 0733-8724

VL - 23

SP - 2267

EP - 2270

JO - Journal of Lightwave Technology

JF - Journal of Lightwave Technology

IS - 7

ER -

Beam quality of photonic-crystal fibers

Abstract

Keywords

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this