Biopolymer stabilization of mine tailings

Rui Chen, Lianyang Zhang, Muniram Budhu

Research output: Contribution to journalComment/debatepeer-review

137 Scopus citations

Abstract

A feasibility study was performed on using xanthan gum and guar gum, two biopolymers that are naturally occurring and inexpensive, to stabilize mine tailings (MT). The simple fall cone method was adopted to evaluate the liquid limit and undrained shear strength of sundried MT mixed with xanthan gum or guar gum solutions at different concentrations. Environmental scanning electron microscopy (ESEM) imaging was also conducted to study the microstructure of the biopolymer-MT system. The results indicate that the inclusion of xanthan gum or guar gum increases both the liquid limit and the undrained shear strength of the MT, higher biopolymer concentrations leading to greater increases. The increase of the liquid limit and undrained shear strength of the MT mixed with a biopolymer solution is mainly attributable to the high viscosity of the biopolymer pore fluid and the bonding between the biopolymer and the MT particles. Guar gum is more effective than xanthan gum in increasing the liquid limit and undrained shear strength of the MT, because the guar gum solution is more viscous than the xanthangumsolution at the same concentration, the guargum-MTparticle bonding is stronger than the xanthan gum-MTparticle bonding, and guar gum causes a lower degree of aggregation of MT particles than xanthan gum. By comparing the undrained shear strength data with empirical equations in the literature, two new equations were proposed for predicting the undrained shear strength of the MT mixed with a biopolymer for water contents near the liquid limit, based on the liquid limit and water content, and the liquidity index, respectively.

Original languageEnglish (US)
Pages (from-to)1802-1807
Number of pages6
JournalJournal of Geotechnical and Geoenvironmental Engineering
Volume139
Issue number10
DOIs
StatePublished - 2013

Keywords

  • Biopolymer
  • Environmental scanning electron microscopy
  • Fall cone method
  • Guar gum
  • Liquid limit
  • Mine tailings
  • Undrained shear strength
  • Xanthan gum

ASJC Scopus subject areas

  • Geotechnical Engineering and Engineering Geology
  • General Environmental Science

Fingerprint

Dive into the research topics of 'Biopolymer stabilization of mine tailings'. Together they form a unique fingerprint.

Cite this