Skip to main navigation Skip to search Skip to main content

The data acquisition system for the KOTO experiment

  • Yasuyuki Sugiyama
  • , Jia Xu
  • , Monica Tecchio
  • , Nikola Whallon
  • , Duncan McFarland
  • , Jiasen Ma
  • , Manabu Togawa
  • , Yasuhisa Tajima
  • , Mircea Bogdan
  • , Jon Ameel
  • , Myron Campbell
  • , Yau Wai Wah
  • , Taku Yamanaka

Research output: Contribution to journal › Article › peer-review

Abstract

We developed and built a new readout and trigger electronics system, based on a waveform digitization and pipeline readout, for the KOTO experiment at J-PARC, Japan. KOTO aims at observing the rare kaon decay K<inf>L</inf> → π<sup>0</sup>vv. A total of 4000 readout channels from various detector subsystems are digitized by 14 bit 125 MHz ADC modules equipped with 10 pole Bessel filters to reduce the pile-up effects. The trigger decision is made every 8 ns using the digitized waveform information. To avoid dead time, the ADC and trigger modules have pipelines in their FPGA chips to store data while waiting for a trigger decision. The KOTO experiment performed the first physics run in May 2013. The data acquisition system worked stably during the run.

Original languageEnglish (US)
Article number7108074
Pages (from-to)1115-1121
Number of pages7
JournalIEEE Transactions on Nuclear Science
Volume62
Issue number3
DOIs
StatePublished - Jun 1 2015

Keywords

  • Data acquisition system (DAQ)
  • FADC
  • VME
  • event building
  • field-programmable gate array (FPGA)
  • front-end electronics
  • high energy physics instrumentation
  • trigger system
  • waveform digitization

ASJC Scopus subject areas

  • Electrical and Electronic Engineering
  • Nuclear Energy and Engineering
  • Nuclear and High Energy Physics

Fingerprint

Dive into the research topics of 'The data acquisition system for the KOTO experiment'. Together they form a unique fingerprint.

Cite this